Electronic port doubler for the CAT interface on FT-817/857/897
If you want to use more than one device on the CAT interface, for example logging program and antenna controller or an external keyboard. CAT-Mate provides two CAT connectors and receives CAT commands from both inputs, the reply from the radio is directed to the socket where the last command came from. CAT port activity is shown with a LED. Further the CAT-Mate has an integrated RS-232 interface, to connect to a serial port only a normal serial cable is required (replaces CT-62). The CAT-Mate does not require a power supply.
Note: The CAT-MATE is not suitable when using a tuner (such as the FC-30, FC-40 etc.) on the FT-857/D or FT-897/D that uses the radio's Tune function/button and the CAT port of the radio for control.
Modern transceivers provide you with more ports than the United Arab Emirates! ALC, PTT, RTTY, audio in, audio out, keying, squelch, band data... All useful, all good, couldn't get along without them, but most of these functions are crammed into one or two multi-pin jacks. And even after you find the right plug, if you want to use more than one function you have to attach multiple cables to it. Cramped soldering, and the cable bundle is usually too big for the plug sleeve. Then, after you get it all hooked up, changing anything means you have to strip your station right down to the electrons and start all over again.
The RCA-14 is a breakout box for the accessory jack on most popular transceivers. It comes with cables (approx. 1m long) with the right DIN plugs and all the output are simple RCA jacks. Plug the RCA-14 into your radio's accessory jack and all of your ports are right at your finger tips. Enclosure size: 16.2 x 7.5 x 7.5 cm
The RCA-14 comes with 5 different cables: DIN-13, DIN-8, DIN-7, Mini DIN-8 and Mini DIN-6.
Compatible for any radios with the above mentioned connectors. e.g.:
Un nuevo USB CAT interface para USB 2.0 o USB1.1, para todos los PCs sin puertos COM. Incorpora CD-ROM para la instalacion Plug & Play. Se creará un puerto COM virtual y cualquier software para Windows™ de control de radio es compatible. En el CD-ROM estan las intrucciones de instalacion y aplicaiones (demo).
RIGtalk tiene un tamaño reducido, con el cable ya testeado para tu radio. Cables disponibles para Icom y Ten Tec CI-V y las nuevas Yaesu CAT. Cables para el sistema de programción HT disponibles pronto.
El nuevo interface USB-II por microHAM es una mejora dele popular USB-interface (mira arriba). Este interface ofrece el mismo nivel de conversión para casi todos los interfaces CAT, isolado electricamente tiene entrada para PTT y CW, una entrada para el squelch y isolado. Es el dispositivo adecuado para todos los usuarios que quieren entrar en los modos digitales con una tarjeta de sonido.
El microHAM USB-II trabaja con todos los interfaces USB, drivers para Windows 98SE/ME/2000/XP, Apple Macintosh OS8/OS9/OS-X y Linux. MS-DOS not soportado.
Nuestros Interfaces USB se han diseñado para ser lo maximo de inmunes contra el fuerte RFI y "RF quiet".
Important: A cable is not included, you need to order a cable separately.
| DB15-IC8 | Cavo Icom (List) | 55.11 (53.50) EUR | |
|---|---|---|---|
| DB15-IC13 | Cavo Icom (List) | 55.11 (53.50) EUR | |
| DB15-TS6 | Cavao Kenwood (List) | 55.11 (53.50) EUR | |
| DB15-TS9 | Cavo Kenwood (List) | 55.11 (53.50) EUR | |
| DB15-TSMINI6 | Cavo Kenwood (List) | 55.11 (53.50) EUR | |
| DB15-FTMINI8 | Cavo Yaesu (List) | 55.11 (53.50) EUR | |
| DB15-FT450 | Cavo FT-450 | 55.11 (53.50) EUR | |
| DB15-FT736 | Cavo FT-736 | 55.11 (53.50) EUR | |
| DB15-FT847 | Cavo FT-847 | 55.11 (53.50) EUR | |
| DB15-FT890 | Cavo FT-890 | 55.11 (53.50) EUR | |
| DB15-FT920 | Cavo FT-920 | 55.11 (53.50) EUR | |
| DB15-FT950 | Cavo FT-950 | 55.11 (53.50) EUR | |
| DB15-FT990 | Cavo FT-990 | 55.11 (53.50) EUR | |
| DB15-FT1000M | Cavo Yaesu FT-1000MP, FT-1000MP MkV, FT-1000MP MkV Field, FT-2000, FT-2000D(List) | 55.11 (53.50) EUR | |
| DB15-FT1000D | Cavo Yaesu FT-1000D | 55.11 (53.50) EUR | |
| DB15-IC8 | Icom | IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738 IC-746, IC-766Pro, IC-7400, IC-756, IC-756Pro, IC-756ProII, IC-756ProIII IC-761, IC-765, IC-775, IC-7700, IC-7800, IC-781, IC-910 |
Schéma |
|---|---|---|---|
| DB15-IC13 | Icom | IC-703, IC-706, IC-706mkII, IC-706mkIIG, IC-718, IC-78, IC-7000, IC-7200 | Schéma |
| DB15-TS6 | Kenwood | TS-50, TS-60, TS-140, TS-440, TS-450, TS-680, TS-690 TS-711, TS-790, TS-811, TS-850, TS-940, TS-950 TS-50, TS-60 - requires Kenwood IF-10D TS-140, TS-680 - requires Kenwood IF-10C TS-711, TS-811 - requires Kenwood IF-10A TS-940 - requires Kenwood IF-10B |
Schéma |
| DB15-TS9 | Kenwood | TS-570, TS-870, TS-2000 | Schéma |
| DB15-TSMINI6 | Kenwood | TS-480HX, TS-480SAT | Schéma |
| DB15-FTMINI8 | Yaesu | FT-100, FT-817, FT-857, FT-897 | Schéma |
| DB15-FT450 | Yaesu | FT-450 | Schéma |
| DB15-FT736 | Yaesu | FT-736 | Schéma |
| DB15-FT847 | Yaesu | FT-847 | Schéma |
| DB15-FT890 | Yaesu | FT-890, FT-900 | Schéma |
| DB15-FT920 | Yaesu | FT-920 | Schéma |
| DB15-FT950 | Yaesu | FT-950 | Schéma |
| DB15-FT1000M | Yaesu | FT-1000MP, FT-1000MP MkV, FT-1000MP MkV Field, FT-2000, FT-2000D | Schéma |
| DB15-FT1000D | Yaesu | FT-1000D (requires ROM Version 6.0 or newer) | Schéma |
Sustituye los convertidores originales. Función identica pero mas bartaos y pequeños: integrado dentro del conector D-Sub, sólo lo tienes que conectar al puero COM del PC. No requiere alimentación adicional.
LCU-3 no sirve para FT-817, usa el CT-62 en su lugar.
Para la transmision de CW. Dos interfaces, uno para puero serie y el otro para paralelo. El interface se conecta al puerto del PC, no requiere alimentación. Incluye 2m de cable con 6.3mm phone plug.
 |
Instrucciones para LCU-SER y el TRX-Manager ( 50 KB) |
Parallel interface
Soporta "Logic", "CT" y muchos otros programas, trabaja con un simple transistor pero isolado. No mas ruido o interferencia.
| Diese Seite drucken | Diese Seite zu den Favoriten hinzufügen |