Icom Desktop rigs

Icom Mobile- and portable transceiver (HF,VHF) are here.
Icom handheld radios are here.

Here you will find:

• IC-718
• IC-7200
• IC-7410
• IC-7600
• IC-7700
• IC-7800
• IC-9100
• Inrad Roofing Filter

Offer of the Week

Icom PS-125 Power Supply, 13.8V, 25A
with 6 pin connector plus adaptor to 4 pin DC connector, suitable for nearly all desktop transceivers (not only by Icom)
Nice optical match for most recent Ico mdesktop radios, like IC-7400, IC-7410, IC-9100, IC-756Pro1/2/3, IC-7600 etc. With the included adaptor all DC connector types can be used.

PS-125 instead of 569,00 € now only 475,00 €! You save 94,00 €.

Order No.
PS-125	Original Icom Power Supply PS-125	475.00 €	Buy now

IC-7800

Icom has been developing radio communication equipment for over forty years. Our history has been technical challenge and excellence from the first analog PLL circuit in the IC-200, to the ground-breaking 32-bit floating point DSP of the IC-756PRO. Icom has always given shape to ideas with this technical accumulation. Recent Ham radio stations increasingly use high power and high gain antennas that raise the field strength of unintended signals, and thus require a wider receiver dynamic range. Icom has developed the new flagship model IC-7800 which is a fusion of forty years analog RF circuit development expertise, with cutting edge digital technology.

The result is 110dB dynamic range, +40dB 3rd order intercept point in HF bands and other phenomenal performance features. The receivers combine various current and new technology, to obtain the +40dBm IP3, a specification never before achieved in Ham radio. Quite simply put, the IC-7800 is the ultimate Ham radio. Nothing else comes close!

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

IC-7700

Icom IC-7700

Dreams become true! If the IC-7800 was too large (for your desk or our wallet) - the best radio technology has moved within your range. The new Icom IC-7700 offers the best receiver technology, based on the profound experiences by Icom engineers. Plus a clean 200W transmitter, using 48V transistor technology for best linearity, the power supply is integrated. A newly designed bandfilter with large components and relays instead of pin diodes (all to alleviate intermod distortions) works in conjunction with the new "Digi-Sel" pre selector and achieves an IP3 of +40dBm at a dynamic range of 110dB! The straightforward receiver design (double superhet) with it's three selectable roofing filters warrants an unsurpassed receiver. This makes the IC-7700 an ideal radio for the ambitious contester and DX chaser.

• IP3: +40dBm
• IP2: +110dBm
• Dynamic range: 110dB
• 3, 6 and 15 kHz Roofing filter
• Digi-Sel Pre selector
• Selectable pre-amplifiers, separate for HF and 50MHz
• IF-DSP for programmable filters
• AGC loop without pumping and pulsing noise
• Highly stable OCXO ± 0,05ppm
• 7" TFT screen, external VGA connector
• USB connectors for storage and keyboard
• RTTY and PSK31 operation without computer possible
• Four switchable antenna connectors
• Realtime spectrum scope, selectable bandwidth
• Excellent noise reduction (NR)
• Adjustable, very effective noise blanker
• S/P-DIF optical connections for AF
• Ethernet connection for firmware upgrades
• 200W transmit power
• 100 memories
• Microphone Equalizer
• Automatic Antenna tuner integrated
• Memory keyer for telegraphy
• Full QSK
• and many more...

Please note that the IC-7700 does not include a microphone in shipment.

Accessories IC-7700

You can see an overview of Icom desktop speakers here.

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

CT-17 Front

CT-17 Rear

Icom Desk Microphones

SM-20

Icom SM-20
Desk microphone with electret mic element for all Icom transceivers with 8pin round Mic socket (Foster socket). Heavy base with keys for PTT and PTT-Lock, plus keys for Up and Down (changes frequency or memory, function depending on radio). The microphone level is adjustable by a small potentiometer on the lower side of the base. The microphone can be adjusted in inclination, a 1m straight cable is included.

SM-30

Icom SM-30
Elegant and light gooseneck microphone with Electret element, for all Icom transceivers with 8pin round Mic socket (Foster socket). Base with keys for PTT and PTT-Lock. The microphone level can be adjusted by a small potentiometer at the lower side of the base, which also locates a slider for 'low cut'. The microphone can be adjusted in height and direction with the flexible gooseneck, the 1m long, straight cable is included.

SM-50

Icom SM-50
Large gooseneck desktop microphone with Electret element, for all Icom transceivers with 8pin round Mic socket (Foster socket). Heavy base with keys for PTT and PTT-Lock, plus keys for Up and Down (changes frequency or memory, function depending on radio), plus easily accessible key for 'low cut'. The microphone level is adjustable by a small potentiometer on the lower side of the base. The microphone can be adjusted in height and direction with the flexible gooseneck, the 1m long, straight cable is included.

IC-7600

Icom IC-7600

In the tradition of the top-of-the-line transceivers IC-7800/IC-7700 Icom now offers the IC-7600. The receiver is a double superhet design with IF DSP, resulting in a much better intermod free dynamic range. Icom claims 104dB dynamic range and an IP3 of +30dBm. Equipped with two 32bit Digital Signal Processors (DSPs) the receiver has two AGC loops, one analog, one digital. This results in a perfectly controlled gain control.

Three selectable 1st IF roofing filters (15, 6 and 3kHz) provide a very good selectivity, especially at SSB and CW modes. The other IF filters are - as usual - freely programmable, due to the DSP design. THree filters can be programmed for each mode. With the well known twin passband tuning a fine tuning of the optimal bandwidth is possible during operation.

The IC-7600 offers the possibility to listen to two frequencies in one band at the same time (Dualwatch). This enables you to listen to the DX station on one VFO, and to the pile-up on the other.A must have for the serious DXer.

And the powerful signal processors offer many more functions, for example an effective noise cancellation, a variable noise blanker, automatic or manual notch filters with three selectable bandwidths, voice recorder functions for receive and transmit and much more. A precise TCXO (temperature controlled crystal oscillator) is factory installed, resulting in a very high frequency stability of ±0.5ppm. Especially digital modes like PSK31 etc benefit from this high stability.

The large colour LC display (5.8") offers a wide viewing angle and is for the first time equipped with a white LED backlight. This greatly reduces heat and has a much longer life than traditional CCFL lights. The multi function meter does not only display transmit power and signal strength, but also current and temperature of the final amplifier, SWR, ALC and compression level and much more.

A USB keyboard can be directly connected to the transceiver, allowing operation in PSK31 and RTTY without a computer. Another USB interface on the rear offers the usual remote control functions plus the receive and transmit audio. This allows for a much easier computer/transceiver integration.

Many more improvements like a selectable amplifier keying (FET or relay), freely programmable band edges, a solid 100W FET amplifier and much more turns the IC-7600 into the perfect HF transceiver for the ambitious radio amateur. And as usual with the best Icom quality!

Included in shipment are a handbook, hand microphone HM-36, carrying handle MB-121, a DC cable plus spare fuses and some hardware parts.

Accessories IC-7600

You can see an overview of Icom desktop speakers here.

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

SM-20

SM-50

CT-17 Front

CT-17 Rear

IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite

Icom IC-9100

IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite

• All Bands: HF + 6m + 2m + 70cm + 23cm [1]
• All Modes: SSB + AM + FM + D-Star + Satellite [2]
• Just one Radio: IC-9100

The IC-9100 combines Icom experiences of many years in one radio. The shortwave receiver has inherited many features of the top radios: selectable roofing filters [3], doble super heterodyne receiver, IF DSP, two separate receivers and much more. Plus the well renowned tradition of Icoms V/UHF radios - now all in one radio.

Two independant receivers allow operation on two different bands, for example on shortwave + VHF or UHF, or VHF + UHF. In front of the first IF stage up to three selectable roofing filters reduce the bandwidth offered to the next stage. A 15kHz roofing filter comes installed, optionally a 6kHz or 3kHz filter can be installed. Especially the narrow filters enhance selectivity on HF and 50MHz. Each receiver has it's own DSP which supports functions like IF filtering, notch filters, AGC control,pas band tuning, noise reduction and much more.

The transmitter offers a full power of 100W on HF, 50MHz and 144MHz, 75W on 430MHz and 10W on 23cm with the optional 23cm module. An automatic antenna tuner for HF/50MHz is built in. The UT-121 D-Star option open the world of state of the art digital modulation on VHF an UHF, but also available on 28 and 50MHz. Together with the D-Star module comes the possibility to receive distance and position information from remote stations. Your own position is received by an optional GPS antenna or can be entered manually.

Also for the communication to the external world Icom uses well-proven and state of the art technology: the CI-V CAT interface, in use since more than 20 years is still available as well as a powerful USB socket. This USB socket offers not only CAT and remote control functions but also an audio interface. This turns the radio into a modem, it act's as an external soundcard to the computer. No more interface hassle required to get started with all computer-based modes! To decode RTTY you don't even need a computer at all, the IC-9100 does this internally.

Here you will find a preliminary datasheet of the IC-9100 (PDF, english).

Accessories IC-9100

The IC-9100 accepts most known accessories by Icom and other suppliers. The transceiver has a 13-pin ACC socket, just like the IC-706, IC-7000, IC-7200 and IC-718.

Here is an overview of Icom desktop speakers suitable for this radio.

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

IC-7410 Shortwave/6m Allmode Transceiver 6m

Icom IC-7410 ^[1]

Based on the successes with the model IC-7400 and IC-7600 Icom offers the IC-7410 as a new midrange DSP shortwave transceiver. The IC-7410 works on all shortwave bands plus 6m, and supports all modes. The receiver design uses a new DSP of the latest generation which is faster the previous models. The new AD/DA converter has a larger dynamic range which results an improved signal to noise ratio, The receiver is designed as a double superheterodyne and offers an excellent IP₃ of +30dBm. Three switchable 1. IF filters (roofing filters) also help in achieving this good result (15kHz filter installed, 3 and 6kHz filters optional).

Icoms long experiences of DSP based transceivers result in many advantages for the radio amateur. Digital filters offer just the right bandwidth for the current situation, Twin Passband Tuning helps to eliminate unwanted signals. The AGC is integrated into and controlled by the DSP loop, which prevents receiver blocking by nearby strong signals. This is further supported by an automatic or manual notch filters. Other DSP functions are a noise reduction system and a very effective noise blanker. But the DSP is also used on the transmit side: adjustable compression, transmit bandwidth and an equalizer are all handled by the DSP.

The transmitter offers a full 100W output power (27W AM), adjustable down to min. 2W. A TCXO (temperature controller crystal oscillator) is already installed for best frequency stability. The internal tuner matches any coax fed antenna from 16 to 150Ω. The large LC display (slightly larger than on the IC-7400) offers all information at a glance, and makes the menu system very easy to use. It displays memory names, a simple bandscope or RTTY decoded text. A USB interface is built in and provides all means to get started in digital modes, without the need of an additional soundcard interface (in most cases). The CAT interface (by USB or traditional CI-V) offers full remote capabilities. With the optional RS-BA1 software the IC-7410 can even be remote controlled over the internet.

Accessories Icom IC-7410

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

IC-7200

Icom IC-7200 ^[1]

The Icom IC-7200 is a compact allmode HF/6m transceiver with IF DSP. That means that you never have to buy IF filters again. Just set the required bandwidth in the menu. The digital signal processor (DSP) is also responsible for an effective noise blanker, a manual notch filter (-70dB) and a useful noise reduction. Due to the integration of the DSP functions into the AGC loop distortions and blocking effects can be reduced at a large scale. For each mode three different AGC time constants can be set.

The transceiver is vary robust and made for outdoor use. It is not waterproof, but some drops of rain won't hurt the IC-7200. The double fan allows the powerful 100W transmitter to transmit for longer periods without overheating.

In contrast to many other transceivers the IC-7200 has a USB connector. This USB connection does not only offer the usual CAT functions but carries the audio signals as well! So the IC-7200 acts like an external USB sound device for your computer, thus greatly helping the integration into a remote controlled station. Of course the traditional CI-V CAT control is also available.

Furthermore the IC-7200 offers many more useful functions like 200 memories, attenuator, VOX, RIT, a built in voice synthesizer, Twin passband Tuning and much more.

[1] Note: The handles shown in the picture are not included in shipment! Included in shipment is: Hand microphone HM-36, power supply cable, spare fuses, german and english user manual.

Accessories IC-7200

Icom RS-BA1 Remote Control Software

This transceiver can be operated remotely over the internet or a local network, using the RS-BA1 software. Detailled information about RS-BA1 software.

MB-116

CT-17 Front

CT-17 Rear

IC-718

Accessories IC-718

SM-20

SM-50

FL-52A

CT-17 Front

CT-17 Rear

TuneRite Tuning Aid

Tuning aid for Icom IC-7800, 756/Pro/I/II/III, 7400, 718 and many more. Details see here.

Accessories Icom

MB-23