NES-10-2 with On/Off(Bypass) switch on bottom side
Loudspeaker with built-in DSP filter. These loudspeakers are suited for HF and VHF use to reduce static, background noise etc. The comprehensibility is greatly enhanced, fatigue when listening for extended periods is avoided.
Both loudspeaker models are suitable for SSB and FM/AM use. The model NES-5 comes with the DSP filter at a fixed level, the model NES-10-2 allows for a variation of the DSP filter level in 8 steps (DIP switches on the rear of cabinet). Additionally the model NES-10-2 offers a volume control, On/Off switch for the DSP function and a 3.5mm mini jack for connection of a headphone or an additional external speaker.
Both models come with a 2m AF cable with 3.5mm mini plug (mono) and must be supplied with 12 to 28V DC, a DC cable is supplied. The supplied mounting bracket is helpful for installation in a car or at home.
Take advantage of latest DSP technology also without the loudspeakers, with the NEIM-1031 DSP noise elimination module. Utilizing the same DSP technology as the above shown loudspeakers but has several connections for audio in- and output. With these connections the NEIM-1031 can be easily integrated into any existiing audio system.
Stamp size PCB (30x38mm) for internal use in most radios. Uses the same DSP technology as the well known loudspeakers. The module is simply installed in the AF line. Potentiometers for input and output lines are provided for required adjustments to different rigs. A LED serves as a tuning aid. 4 different filter shapes (or none) are selectable with one button.
This module is especially suitable for installation in the FT-817 transceiver. Due to it's small size it fits into the unit without sacrificing any space, say for the battery or similiar. The control button and LED are mounted in the upper cover of the FT-817.
Radcom UK Review of the FT-817 DSP module NEDSP-1061. Copyright RSGB. Republished from RadCom with permission of RSGB.
NEDSP1062 Amplified DSP Noise Eliminating PCB Module – This module incorporates an on board power amplifier and has an integral microcontroller connected to a small keyboard assembly. The microcontroller and keyboard provide single button operation of all the module’s functions. The module can be retrofitted into the speaker path of extension speakers like the Kenwood SP31, Yaesu SP8 and Icom SP20/21/23, or used to 'revive' your old receiver/transceiver by fitting the module into the speaker path of your equipment (space permitting). The module is supplied with Generic Instructions, a fused DC power lead, fitting kit and specific fitting guides for the Kenwood SP31 and Yaesu SP8. Requires 12-18V, includes cable and fuse.
New DSP module with amplifier, for integration into the loudspeaker cable. No mechanical work required, just plug it into the cable to the external speaker and supply with 12VDC. Reduces noise in all modes, eight filters selectable, integrated amplifier, DSP bypass function (Off), can be installed anywhere with Velcro™. Necessary cables are included.
The ANEM unit was developed as a result of feedback from potential customers of the NEDSP1062-KBD pcb module. These customers felt that they did do not have the skills, or didn't want to drill holes into their beloved extension speaker or radio to fit the NEDSP1062-KBD. As a result of some market research, we decided to fit the NEDSP1062-KBD pcb module into a small black compact ABS box, allowing these customers to put the unit close to, under, or even fix the ANEM to their speaker by means of velcro (supplied with the unit). It also complemented the fully featured bhi NEIM1031 in-line module because the ANEM has just two push button controls for all the DSP functions, and is more of a "plug and go" unit, whereas the NEIM1031 is more of a "plug and play" unit, with separate controls for all the functions.
Small switchbox with 6 inputs (three of them terminated to 8 Ω) and one output (or vice versa). For connection of several radios to one DSP loudspeaker. Connections 3.5mm phono plug, includes 2 cables 120cm.
 |
 |
|
DIAMOND speaker for car and home... versions P-610 and P-810 habe 8 Ω, 4 watt, supplied with 3m cable and 3.5mm mono plug P-810A: this speaker has an additional built-in amplifier. Very suitable for cellphones, handheld radios or navigation systems, which usually have a much too small internal speaker. Especially in a car and when driving these small devices are hard to understand, the P-810A makes an ideal option. Requires 12VDC supply, has volume control, otherwise like P-810.
Order No.
40200 P-610 63x60x33mm 21.12 (20.50) EUR 40202 P-810 117x91x41mm 26.99 (26.20) EUR 40202.A P-810A with built-in amplifier 37.03 (35.95) EUR
|
|
 |
 |
|
Car speaker with excellent frequency response for voice, with installation clip, screws, cable, and 3.5 mm plug; handles 5 Watt. |
Original PEIKER loudspeaker KL-1 developed especially for voice frequencies, proves excellent clarity, with mounting clip and cable, handles 4 Watt. |
Large desktop speaker, in size and design suitable for FT-1000, FT-920 etc usw. Excellent audio, separately selectable audio filters for bass and treble. Two selectable audio inputs, two separate headphone connectors audio mute, one audio cable included.
Large desktop speaker, in size and design suitable for FT-2000, FT-2000D etc. Excellent audio, separately selectable audio filters for bass and treble. Two selectable audio inputs, headphone connector, audio mute, audio cable included.
Waterproof loudspeaker with high output power.
The MLS-200 is designed to be used outdoors, for example on the handle bar of a motorbike or in the garden (protection IP-55: Protection against direct water, against dust). Max. load is 12W, impedance 4Ω, comes complete incl. universal mounting bracket and 3m cable with mini phone plug.
Diameter 92mm, weight 650 Gr.
Large desktop speaker, in size and design suitable for IC-775DSP etc. Excellent audio, separately selectable filters for bass and treble. Two selectable audio inputs, headphone connector, mute. Two audio cables included. Size 195 x 165 x 345mm (WxHxD).
Desktop speaker, in size and design suitable for IC-756(Pro/II/III), IC-7400 etc. Excellent audio quality. One audio input, one audio cable (mono) included.
Desktop speaker, in size and design a perfet match for IC-756Pro(II/III), IC-7400 etc. Excellent audio quality, two separately selectable audio filters each for bass and treble. Twoi selectable audio inputs, headphone connector, mute. One audio cable (mono) included. Size 145 x 120 x 290 mm (WxHxD)
Desktop speaker, in size and designe suitable fot TS-570D, TS-2000 etc. with good audio quality. One audio input, a cable is included.
| Diese Seite drucken | Diese Seite zu den Favoriten hinzufügen |