Digi Keyer external soundcard with CAT interface

More than just a soundcard interface - Digi Keyer

The Digi Keyer is much more than an interface, because it is an own, self contained soundcard. Together with the other integrated components like CAT interface and PTT/FSK/CW keyer this is a very versatile interface for all special modes. Use RTTY, Fax, SSTV, Echolink, PSK31, MFSK, Olivia, WSJT, APRS and many more, everything which is supported by a soundcard.

With the integration of a high-quality soundcard you have several advantages:

• The internal soundcard remains free for other tasks, e.g. system sounds
• No noise like often seen with soundchips on the motherboard
• Developed by radio amateurs for radio amateurs: much better dynamic range and less noise as with simple consumer cards
• No need to change soundcard connections on your PC
• Two line-in channels for AF from Main and Sub VFO (where supported)
• Better AF quality with notebooks, where the microphone input does not offer the right impedance
• Support for practically all OS due to native USB soundcard drivers
• Only one cable between interface and PC: a standard USB cable

Of course all connections between radio and PC are electrically isolated to avoid noise loops. Between the Digi Keyer interface and the PC just a standard USB cable is required. And also from interface to the radio it's only one cable, which usally connects to the rear connections of the radio. This greatly simplifies station setup.

The integrated CAT interface transmits frequency nad other information between PC and radio, most manufacturers are supported: Icom, Kenwood, Yaesu, Elecraft, JRC, and TenTec. Depending on type a level conversion is done by the interface.

With just one cable between Digi Keyer and radio all connections for CW, PTT and FSK keying are done. Further the interface offers two more time delayed PTT lines for power amplifier and pre-amp keying.

A remote connection on the rear side of the Digi Keyer is used for a PS/2 keyboard (full or 10 Keypad, see below). With this keyboard pre-defined text can be recalled for digital modes like RTTY.

The cable between Digi keyer and radio is individual to each radio model and must be ordered separately. We offer cables for most radio models. If the interface will be used on several radios, just order one cable for each radio.
Weight 0.55kg, Size 175x85x44mm.

Note: A computer with at least 800MHz processor clock is recommended for use with the Digi-Keyer.

Digi Keyer 252.35 (245.00) EUR

Lista de cable microHAM Digi-Keyer y USB-2

DB15-IC8	Cavo Icom (List)	55.11 (53.50) EUR
DB15-IC13	Cavo Icom (List)	55.11 (53.50) EUR
DB15-TS6	Cavao Kenwood (List)	55.11 (53.50) EUR
DB15-TS9	Cavo Kenwood (List)	55.11 (53.50) EUR
DB15-TSMINI6	Cavo Kenwood (List)	55.11 (53.50) EUR
DB15-FTMINI8	Cavo Yaesu (List)	55.11 (53.50) EUR
DB15-FT450	Cavo FT-450	55.11 (53.50) EUR
DB15-FT736	Cavo FT-736	55.11 (53.50) EUR
DB15-FT847	Cavo FT-847	55.11 (53.50) EUR
DB15-FT890	Cavo FT-890	55.11 (53.50) EUR
DB15-FT920	Cavo FT-920	55.11 (53.50) EUR
DB15-FT950	Cavo FT-950	55.11 (53.50) EUR
DB15-FT990	Cavo FT-990	55.11 (53.50) EUR
DB15-FT1000M	Cavo Yaesu FT-1000MP, FT-1000MP MkV, FT-1000MP MkV Field, FT-2000, FT-2000D(List)	55.11 (53.50) EUR
DB15-FT1000D	Cavo Yaesu FT-1000D	55.11 (53.50) EUR

Lista de cable microHAM diagrama

10-Keypad

El teclado e conecta directamente al microKEYER y permite el control de varias funciones de CW, ajustar la velocidad y mucho más. Las funciones RTTY requieren un teclado completo PS/2 (un teclado USB no funcionará!).

Articulo No.
MK-Keypad 10 keypad 26.16 (25.40) EUR